Passenger cars
Showing 199–297 of 300 results
-
Tyre changer G7645D.26PLUS
Automatic, max. speed 16 rpm, passenger car, rim diameter 10 – 28.5″, max. rim width 431 mm | Blue (RAL 5005)
-
Tyre changer G7645ID.26
Automatic, max. speed 16 rpm, passenger car, rim diameter 10 – 28.5″, max. rim width 431 mm | Blue (RAL 5005)
-
Tyre changer G7645D.26
Automatic, max. speed 16 rpm, passenger car, rim diameter 12 – 26″, max. rim width 431 mm | Blue (RAL 5005)
-
Tyre changer G7240.20
Semiautomatic, Swing series, max. speed 7.3 rpm, passenger car, rim diameter 10 – 22.5″ (chucking table 20″), max. rim width 305 mm | Blue (RAL 5005)
-
Tyre changer G7641D.24PLUS
Mounting head and mounting lever, automatic, max. speed 16 rpm, passenger car, chucking table with double adjustable clamp position, rim diameter 10 – 26.5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
-
Tyre changer G7641ID.24
Mounting head and mounting lever, automatic, max. speed 16 rpm, passenger car, chucking table with double adjustable clamp position, rim diameter 10 – 26.5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
-
Tyre changer G7641D.24
Mounting head and mounting lever, automatic, max. speed 16 rpm, passenger car, chucking table with double adjustable clamp position, rim diameter 10 – 26.5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
-
Tyre changer G7641IV.22
Mounting head and mounting lever, automatic, 2 speeds (max. 13 rpm), passenger car, chucking table with double adjustable clamp position, rim diameter 11 – 24.5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
-
Tyre changer G7641V.22
Mounting head and mounting lever, automatic, 2 speeds (max. 13 rpm), passenger car, chucking table with double adjustable clamp position, rim diameter 11 – 24.5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
-
Tyre changer G7441V.22PLUS
Automatic, 2 speeds (max. 13 rpm), passenger car, rim diameter 10 – 24.5″, max. rim width 381 mm | Blue (RAL 5005)
-
Tyre changer G7441IV.22
Automatic, 2 speeds (max. 13 rpm), passenger car, rim diameter 10 – 24.5″, max. rim width 381 mm | Blue (RAL 5005)
-
Tyre changer G7441V.22
Automatic, 2 speeds (max. 13 rpm), passenger car, rim diameter 10 – 24.5″, max. rim width 381 mm | Blue (RAL 5005)
-
Tyre changer G7441.22
Automatic, passenger car, rim diameter 10 – 24.5″, max. rim width 381 mm | Blue (RAL 5005)
-
Tyre changer G7441.20
Automatic, max. speed 7.3 rpm, passenger car, rim diameter 10 – 24.5″, max. rim width 381 mm | Blue (RAL 5005)
-
Tyre changer G5140IH.22U
Mounting head and mounting lever, semiautomatic, incl. tubeless tyre inflation device, max. speed 7/14 rpm, passenger car, rim diameter 10 – 24″, max. rim width 420 mm | Blue (RAL 5005)
-
Tyre changer G5140.22M
Mounting head and mounting lever, semiautomatic, incl. tire inflator, max. speed 7/14 rpm, passenger car, rim diameter 10 – 24″, max. rim width 420 mm | Blue (RAL 5005)
-
Tyre changer G5440V.22G
Mounting head and mounting lever, semiautomatic, incl. tire inflator, 2 speeds (max. 14 rpm), passenger car, rim diameter 10 – 24″, max. rim width 330 mm | Grey (RAL 7016)
-
Tyre changer G5440I.22M
Mounting head and mounting lever, semiautomatic, incl. tubeless tyre inflation device, max. speed 7/14 rpm, passenger car, rim diameter 10 – 24″, max. rim width 330 mm | Blue (RAL 5005)
-
Tyre changer G5440I.22U
Mounting head and mounting lever, semiautomatic, incl. tubeless tyre inflation device, max. speed 7/14 rpm, passenger car, rim diameter 10 – 24″, max. rim width 330 mm | Blue (RAL 5005)
-
Tyre changer G5440.22
Mounting head and mounting lever, semiautomatic, incl. tire inflator, max. speed 7/14 rpm, passenger car, rim diameter 10 – 24″, max. rim width 330 mm | Blue (RAL 5005)
-
Aggregate plate with supporting arms GA P (Porsche)
A particularly versatile aggregate plate for the removal and installation of engines, transmissions, axles, exhaust systems, etc.
-
Aggregate support Universal | for W221, W164, W209, R171
Weight 20 kg, load capacity 800 kg
-
Cross-beam for ArtisLift MRG55
15 t
-
Crossbar height adjustment
Kit for increasing overhead cable passage height by up to +1.5 m | for spindle lifts | 1 set
-
Diagnostic kit STDADIAG
IDC5 KIT TEXA – for diagnostic wheel alignment | kit for those who have a wheel alignment but no TEXA accessories
-
Diagnostic kit STDADIAG/SW
TEXA IDC5 SW KIT – for diagnostic wheel alignment | kit for those who already have TEXA devices (e.g., ADAS RCSS)
-
Eyebolt
3.5 t – 4.2 t | facilitates installation of the lift, can be used again for other installations | 1 set
-
Eyebolt
5.5 t | facilitates the handling and installation of the lift, reusable for multiple installations | 1 set
-
Height variant H=4780 mm
Grey (RAL 7040)
-
Height variant H=4780 mm
Blue (RAL 5005)
-
Inground cable connection kit
Allows columns connection cables to be placed inground | 1 piece
-
Nuts wear check-tool
-
Pads
Support plate, rubber pad, adjustable – for quick-positioning on 4 heights | 4-stage | 1 set / 4 pieces
-
Pads frame adapters kit
Pads frame adapters kit Ø 120 mm (1 set, 2 pcs), for turntable
-
Retrofit kit Fast clamps
CCD kit for 3D Quick-clamps (VSG.FC167.701916 to VSG.FC169.701923) | 1 set / 2 pieces
-
Spacers for pads
4 x 200 mm, incl. bracket for mounting on the pillars | 1 set / 4 pieces
-
Spacers for pads
4 x 90 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | Only for AV arms | 1 set / 8 pieces
-
Spacers for pads for electromechanical lifts
4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces
-
Stands for alignment
1 set / 4 pieces
-
Support plates
3.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
-
Support plates
4 / 4.2 / 4.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
-
Support plates
3.2 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
-
Support plates
5.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
-
Tension belt gauge
-
Tool support
Ergonomic holder for impact wrench
-
Tool trays
Magnetic | 1 set / 2 pieces
-
Traverse for HydroLift S3 7,5/8,2
Max. load bearing capacity 16.4 t, king pin support | only in conjunction with traverse (item no. 119777)
-
Universal support Ø 35 mm
Mounting hole Ø 35 mm, suitable for holding various tools, such as the transmission plate GA passenger car | fitted with a bushing
-
Vehicles lift platforms
Ramp height 60 mm, for extremely low vehicles | 1 set / 2 pieces
-
Wheel clamps Fast clamps
Quick-clamps | for 3D wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.5 kg (per set) | 1 set / 2 pieces
-
Wheel clamps Fast clamps
Quick-clamps | for CCD wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.8 kg (per set) | 1 set / 2 pieces
-
Width extension
For 2-post lift KPX35LLE | enables columns to be widened up to 3200 mm
-
Body shop lift RAV.KBI30.199973
3.0 t, electrohydraulic, with pneumatic operated arms and TEq-Link, inground
-
Headlight beam tester CFD102 | Standard
Mechanical headlight beam setter with digital luxmeter, based on wheels, laser visor and laser pointing system
-
Jacking beam J17X
2.0 t, Hydraulic, with hand-pump | for all hydraulic 4-post lifts / scissor lifts
-
Jacking beam J20NX
2.0 t, hydraulic, operated by means of hand-pump
-
Jacking beam J20PNR
2.0 t, air-hydraulic
-
Jacking beam J20PNRL
2.0 t, air-hydraulic
-
Jacking beam J20PNX
2.0 t, air-hydraulic
-
Jacking beam J20PNXL
2.0 t, air-hydraulic
-
Jacking beam J30PKL
3.0 t, air-hydraulic
-
Jacking beam J30PR
3.0 t, air-hydraulic
-
Jacking beam J30PRL
3.0 t, air-hydraulic
-
Jacking beam J30PX
3.0 t, air-hydraulic
-
Jacking beam J30PXL
3.0 t, air-hydraulic
-
Jacking beam J30X
3.0 t, hydraulic, operated by means of hand-pump
-
Jacking beam J40PKL
4.0 t, air-hydraulic
-
Jacking beam J40PRL
4.0 t, air-hydraulic
-
Jacking beam J40PXL
4.0 t, air-hydraulic
-
Jacking beam J40PY
4.0 t, air-hydraulic
-
Jacking beam J50PHA
5.0 t, air-hydraulic
-
Jacking beam J50PHT
5 t, 392 mm stroke, air-hydraulic, telescopic jack, roller bearings in the track, air supply on site
-
Jacking beam JS17
2.0 t, hydraulic, operated by means of hand-pump
-
Jacking beam JS20PR
2.0 t, air-hydraulic
-
Jacking beam JS20PRL
2.0 t, air-hydraulic
-
Jacking beam JS30PR
3.0 t, air-hydraulic
-
Jacking beam JS30PRL
3.0 t, air-hydraulic
-
Jacking beam JS40PRL
4.0 t, air-hydraulic
-
Jacking beam KP118
13.5 t, hydraulic, operated by means of hand-pump
-
Jacking beam KP118/440P
13.5 t, air-hydraulic, operated by means of hand-pump or air-hydraulic pump, operating pressure 6 – 10 bar, translation on ball-bearing
-
Jacking beam KP118NP
13.5 t, air-hydraulic, operated by means of hand-pump or air-hydraulic pump, operating pressure 6 – 10 bar, translation on ball-bearing
-
Jacking beam KP118P
13.5 t, air-hydraulic
-
Lifting table KT100
1.0 t, 1300 mm stroke, hydraulically-operated foot pump
-
Lifting table KT100XT
1.0 t, 1300 mm stroke, hydraulically-operated foot pump
-
Lifting table KTE100
1.0 t, 1300 mm stroke, hydraulically-operated foot pump
-
Lifting table KTE200
2.0 t, 1000 mm stroke, air hydraulic pump
-
Lifting table KTO100
1.0 t, 1300 mm stroke, hydraulically-operated foot pump
-
Mobile wheel carriage GR80WS
Battery powered, capacity 80 kg
-
Nitrogen generator SNG T
“Stand-alone” | for cars and trucks tyres, up to 12000 l/h
-
Plate brake tester RAVRT700PLT
Universal car/motorcycle plate brake tester, max. axle load testable 2 t axle load, installation inground or above ground
-
Plate brake tester RAVRT900PLT
Universal car/motorcycle plate brake tester, max. axle load testable 2 t axle load, installation inground or above ground
-
Play detector 200 Series
The equipment generates an alternate stress on the wheels and, therefore, on the organs of the steering wheel and suspensions, allowing a visual check of any defects (clearance of the spherical couplings, silent block, damper attachment, etc.). Electrohydraulic operation Plate with indented surface to prevent plate-wheel sliding Possibility of floor, recessed or pit installation For…
-
Roller brake tester RAVRT122P4F
Universal car/motorcycle plate brake tester, 2.5 t axle load, 6000 N
-
Scissor lift RAV650N.2.55ISI 230-400 V – 50 Hz
5.0 t, electrohydraulic, platform length 5500 mm, with wheel-free jack and platforms for wheel alignment, inground | 230 V / 50 Hz | Blue (RAL 5005)
-
Scissor lift RAV650N.2.55ISIQ
5.0 t, electrohydraulic, platform length 5500 mm, with wheel-free jack, platforms for wheel alignment and TEq-Link, inground
-
Tyre tread depth measuring system RAVWS101
Complete stand-alone version, incl. ramps and console, above ground
-
Tyre tread depth measuring system RAVWS101I
Complete stand-alone version, incl. console, inground
-
Tyre tread depth measuring system RAVWS102
Quick-check version, with wall-mounted switchboard, without monitor, above ground
-
Tyre tread depth measuring system RAVWS102I
Quick-check version, with wall-mounted switchboard, without monitor, inground