Accessories wheel aligners
Showing all 93 results
Quick check bracket
Quick check bracket for mobile use (option)
Level and height gauge
Level and height gauge (option)
Subframe for trailer measurement
Crossbar for Gutmann CSC Tool
Crossbar for mounting the measuring sensors to the wheel aligners from Hella Gutmann, 16 kg, (H x W x D) 246 x 2598 x 101 mm
Calibration system ACS (All Around Calibration System)
Allows calibration of the 360° cameras and dopplers for VAG Group vehicles (Audi, Seat, Skoda, Volkswaagen, Lamborghini)
Subscription Texainfo Car (Call Center)
Available only in the Countries where TEXA is offering the Call Center service (Italy, Germany, France, Spain, United Kingdom, Ireland, Poland, Austria and Switzerland)
Measuring heads 18422-18423 | front | passenger car
For wheel alignment operations on passenger cars, front measuring heads 18422-18423 have to be purchased separately. For wheel alignment operations on trucks and buses, measuring heads RAVTD8060TWSR supplied with the aligner must be used.
Metal claws (n.8) | for STDA33EU-34E (standard) and STDA46EU-35E-95E
Cable extension for emergency power supply to one measuring heads | for WS series
to one measuring heads | for WS series
for 635-640-650-660 series – excl. SI versions | supplied instead of standard front stops S6350A4, an Stelle von Abrollsicherungen geliefert | 1 Paar
Pair of clamps with quick locking arms for Porsche rims, including blocking groups and 2+ 2 adapters | Tyre Ø from 380 to 810 mm
Sets 8 ABS claws for pneumatic support , with flat profile with quick locking arms | per STDA46EU-48E-35E-95E
Brackets for board installation ADAS (AUTEL)
Brackets for board installation ADAS (VAS6430 VW)
Pair of goniometers for commercial vehicle turn tables | for STDA29L
Kit for quick positioning of 3D targets (4 pcs)
Safety strings kit | for STDA33EU-34E (standard) and STDA46EU-35E-95E
Token ( authorisations) allowing connection feature
allowing connection feature
Set of 6 extensions for metal fingers for wheels with protruding spokes | for STDA33EU-34E (standard) and STDA46EU-35E-95E
Front ramps vorne
Rear focal points supports for adapter STDA49N / 4CCD WS truck aligner | 1 set / 2 pieces
for adapter STDA49N / 4CCD WS truck aligner | 1 set / 2 pieces
Passenger car wheel alignment kit STDA159
Kit for converting truck aligner 6CCD into a vehicle aligner
Brake pedal depressor
Extension Kit for a pair of 3 point clamps | rim Ø 24″ to 28″
for a pair of 3 point clamps | rim Ø 24″ to 28″
Drive on ramps 1900 mm | 1 pair
Stands for wheel alignment | load capacity per stand 800 kg | 1 set / 4 pieces
Spirit levels for targets | 1 set / 4 pieces
Vehicle data bank
Lift mounting brackets for 3D measurement transducer | 1 set / 2 pieces
Extra batteries | 1 set / 2 pieces
Magnets for clamp support | 1 set
Turn tables for trucks | 1 set / 2 pieces
Capacity 2 x 4500 kg
Online training Self-study e-learning course for ADAS diagnosis and calibration (D9C)
Spare batteries for 3D aligners | 1 set / 2 pieces
Database update 2 years | free
Kit for fast calibration of inclinometers for 3D wheel aligners
Run up ramps S601A4, replacing the standard ramps | 1 pair
Calibration kit Standard | only for WS and WD series, replaces STDA14
Clamps with quick locking arms for BMW, Mercedes rims | Tyre Ø from 480 to 915 mm | 1 pair
Calibration kit for 3D aligners
Spare batteries for 3D aligners | 1 set / 2 pieces
Turn tables mechanical | for passenger cars | 1 set / 2 pieces
Trolley for wheel clamps
Wheel clamps Truck | 4-point | rim Ø 12 – 28″, tyre Ø 780 – 1220 mm | 1 pair
4-point truck self-centering clamps with quick-locking arms, movable shaft | including metal grabbing armser
Spacers mid size | for truck wheel clamps STDA92 | 1 set / 6 pieces
Wheel clamps truck | 3-point | tyre Ø 890 – 1290 mm | 1 pair
Special truck clamps with quick-locking arms to prevent wheel compensation, clamping on rim flange
Wheel clamps Truck | 4-point | rim Ø 12 – 28″, tyre Ø min. 700 mm | 1 pair
4-point truck self-centering clamps with quick-locking arms, movable shaft | including long removable claws
Adapters for 3-point clamps for CCD wheel alignment on 2-post lifts | -120 mm | 1 set / 4 pieces
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 760 mm | 1 set / 2 pieces
3-point clamps with quick locking arms | with Quick-Lock
Extensions for 3-point clamps | for rims from 26 – 28″ | 1 set / 4 pieces
Extensions for 3-point clamps | for rims from 24 – 28″ | 1 set / 4 pieces
For STDA34E-35E-95E
Access point kit to transmit to smartphones/tablets
WiFi access point | STDA141 required
Token (software licence) to use with on smartphones/tablets
Remote display on a mobile device
Turn tables STDA124 | supplied instead of standard version | 1 set / 2 pieces
Emergency cable | 1 set / 2 pieces
Wall panels for wheel holders | 2 pieces
Wall brackets for wheel holders | 4 pieces
Sliding plates 1100 x 500 x 50 mm | 1 set / 2 pieces
Sliding plates 1500 x 500 x 50 mm | 1 set / 2 pieces
Sliding plates 300 x 225 x 35 mm | 1 set / 2 pieces
Mini targets for measuring the vehicle height
Measuring head holder for installation of 3D aligners on a pit | 1 set / 2 pieces
Claws for low profile tyres / 4 or 3 holder | Steel | 8 pieces
Claws for 3-point holder | with small profile, ABS | 8 pieces
For STDA46EU-48E-35E-95E
Special claws for VW to be used with clamps with quick locking arms | ABS | 8 pieces
Claws | conic, of ABS | 8 pieces
For STDA46EU-48E-35E-95E
Claws for vans | long, metall | 8 pieces
For STDA30E-48E (standard) and STDA33EU-46EU-34E-35E-95E
Brakets for 3D alignment | 1 set / 2 pieces
Token (password) for consulting database on-line
Online database via query of German Federal Bureau of Motor Vehicles and Drivers (KBA)
Turn tables Premium, HD | Ø 360 mm | 1 set / 2 pieces
Advanced enabling of ADAS functions
Token (password) for additional functions
Steering wheel lock
Plastic steering wheel lock with non-slip rubber guards for steering wheel and seat
Wi-Fi antenna Wheelalignment-On
Wi-fi USB flash drive included
Wheel clamps 4-point | rim Ø 10 – 24″, tyre Ø 480 to 910 mm | 1 sets / 2 pieces
Self-centering 4-point clamps with quick locking arms | with Quick-Lock
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm | 2 sets / 4 pieces
Self-centering 3-point clamps with quick locking arms
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm | 2 sets / 4 pieces
Self-centering 3-point clamps with quick locking arms
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm | 2 sets / 4 pieces
Self-centering 3-point clamps with quick locking arms | for WD and WS models | 2 sets / 4 pieces
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm | 1 set / 2 pieces
Self-centering 3-point clamps with quick locking arms | with Quick-Lock Premium
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm | 1 set / 2 pieces
Self-centering 3-point clamps with quick locking arms, without compensation
Wheel clamps 3-point | 1 set / 2 pieces
Self-centering 3-point clamps
Wheel clamps 4-point | rim Ø 10 – 24″ | 1 set / 2 pieces
Self-centering 4-point clamps, including removable claws
Turn tables Standard | Ø 300 mm, capacity 1000 kg | 1 set / 2 pieces
Turn tables Standard | Ø 300 mm | 1 set / 2 pieces
Token (software licence) to use with on smartphones/tablets
Remote display on a mobile device
Wheel clamps 4-points | rim Ø 12 – 28″ | 1 pair
4-point self-centering clamps | including removable claws
Wheel clamps 3-point | rim Ø 8 – 24″ | 1 set / 2 pieces
3-point clamps with quick locking arms
Quick-locking arms for upgrading 4-point wheel clamps STDA30E | tyre Ø 780 – 1220 mm | 1 pair
To upgrade 4-point truck clamps STDA30E to STDA48E | including metal fingers
Quick locking arms for upgrading 4-point wheel clamps STDA33EU-34E | tyre Ø 480 – 760 mm | 1 set / 2 pieces
To upgrade wheel clamps STDA33EU-34E to STDA46EU-35E | allows to avoid run out compensation | including ABS fingers
Grabber arms | medium size | tyre-Ø 680 – 910 mm | 2 sets / 4 pieces
For STDA35E-95E and locking groups STDA38
Grabber arms | long size| tyre-Ø 860 – 1115 mm | 2 sets / 4 pieces
For STDA35E-95E and locking groups STDA38
Seat for turn tables for heavy duty trucks
Turntables and sliding plates not included!
Quick locking tire gripper for upgrading 4-point wheel clamps STDA33EU-34E | tyre Ø 480 – 760 mm | 2 sets / 4 pieces
To upgrade wheel clamps STDA33EU-34E to STDA46EU-35E | allows to avoid run out compensation | including ABS fingers