Accessories 2-post lifts
Ensure safety and stability during lifting operations by using accessories for 2-post lifts such as pads and supports.
Showing all 60 results
Adpators with pads for chassis lifting 1 set / 2 pieces
1 set / 2 pieces
Door protections for 2-post lifts
1 set / 2 pieces
Energy set
Eyebolt for handling columns 901927
3.2 t – 3.5 t – 4.2 t | facilitates installation of the lift, can be used again for other installations
Eyebolt for handling columns 902894
5.5 t | it facilitates the handling and installation of the lift, reusable for multiple installations
Factory assembly of the lighting kit S440A5 on the lift
of the lighting kit S440A5 on the lift
Frame engaging adapters 901163
Kit with adapters | 1 set / 4 pieces
Illumination Kit
Increasing overhead cable passage 902344
Kit for increasing overhead cable passage height by up to +1.5 m
Inground cable connection kit 902498
Allows columns connection cables to be placed inground, eliminating the overhead connecting pipes and hight restrictions | Ideal for workshops with low ceilings
Limit switch | operated by bar | for 3-phase power supply | supplied not installed
For all lifts with 3-phase power supply
Outrigger plates 901361
3.2 t | allowing installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Outrigger plates 901378
3.5 t | allowing installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Outrigger plates 901453
4.2 / 4.5 t | allowing installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Outrigger plates 902412
5.5 t | allowing installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Outrigger plates for floors with a concrete thickness of 100 – 150 mm (+ 15 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 100 – 150 mm | 1 set / 2 pieces
Outrigger plates for floors with a concrete thickness of 150 mm (+20 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 150 mm | 1 set / 2 pieces
Outrigger plates for floors with a concrete thickness of 150 mm (+20 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 150 mm | 1 set / 2 pieces
Pads 3.7 t | 1 set / 4 pieces
For lifts with capacity 3.7 t
Pick-up pad extensions for EV arms | 4 x 200 mm | 1 set / 4 pieces
Incl. 2 organizer racks for mounting on the columns
Pick-up pad extensions for EV arms | 4 x 89 mm, 4 x 127 mm | 1 set / 8 pieces
Incl. 2 organizer racks for mounting on the columns
Retrofit kit arms with rotating final stage | 4 pieces
arms with rotating final stage | 4 pieces
Run up ramps 2600 mm
1 pair
Run up ramps long
Ramps S4652LA3 replacing the standard ramps | 1 pair
Run up ramps long, 1200 mm
Ramps S4651LA3 replacing the standard ramps | 1 pair
Run up ramps long, 1500 mm
Ramps S4502LSIA2 replacing the standard ramps | 1 pair
Run up ramps long, 2600 mm
Ramps S440A3 replacing the standard ramps | 1 pair
Run up ramps long, 2600 mm
Ramps S442A3 replacing the standard ramps | 1 pair
Spacer supports bushing Ø 60 mm
1 set / 2 pieces
Spacers 10 mm | for K arms | 1 set / 4 pieces
Spacers 140 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | for quick drop-in of the K arms, Ø 45 mm | 1 set / 4 pieces
Spacers 140 mm | or quick drop-in of the R arms
Set of pad extensions for 2-post lifts | 1 set / 4 pieces
Spacers 200 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | bushing Ø 45 mm | 1 set / 4 pieces
Spacers 80 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | for quick drop-in of the K arms, Ø 45 mm | 1 set / 4 pieces
Spacers for pads 901071
4 x 89 mm, 4 x 127 mm | incl. 2 organizer racks for mounting on the columns | 1 set / 8 pieces
Spacers for pads 901248
4 x 200 mm | incl. 2 organizer racks for mounting on the columns | 1 set / 4 pieces
Support pads 901330
U-shaped frame engaging adapters | 1 set / 4 pieces
Support pads 901538
Kit with pads for TESLA | 1 set / 4 pieces
Support pads 901606
4 pads for Ducato / Boxer / Jumper – 2 front and 2 rear | 1 set / 4 pieces
Support pads 901712
For Mercedes Sprinter and Volkswagen Crafter, old and new series | 1 set / 6 pieces
Support pads 901859
4 pads for Mercedes G class – 2 front and 2 rear | 1 set / 4 pieces
Support pads 902023
Kit with pads for Fiat 500E, 500 ABARTH | 1 set / 4 pieces
Support pads 902146
Kit with pads for MEB platform | 1 set / 4 pieces
Support pads for Fiat 500E, 500 ABARTH
Supports for 2-post lifts | 1 set / 4 pieces
Support pads for Mercedes Sprinter/VW LT + Crafter | Ø 45 mm
V-shaped supports | bushing Ø 45 mm | 1 set / 2 pieces
Support pads for Mercedes Sprinter/VW LT + Crafter | Ø 45 mm
Holding set, adjustable – 2 x rod-shaped supports, 2 x V-shaped supports | bushing Ø 45 mm | needed spacers S224A3-A4 S370A18 | 1 set / 4 pieces
Support pads for Mercedes Sprinter/VW LT + Crafter | Ø 60 mm
V-shaped supports | bushing Ø 60 mm | 1 set / 2 pieces
Support pads TESLA | for EV arms
Supports for 2-post lifts | 1 set / 4 pieces
Support pads TESLA | for K arms Ø 45
Supports for 2-post lifts | 1 set / 4 pieces
Support pads TESLA | for K arms Ø 55
Supports for 2-post lifts | 1 set / 4 pieces
Supports for spacers, bushing Ø 45 mm
For 2-post lifts | 1 set / 2 pieces
Tool support 902511
Ergonomic holder for impact wrench
Tool trays | magnetic | 1 set / 4 pieces
Tool trays 902641
Magnetic | 1 set / 2 pieces
Vehicles lift platforms 1 set / 4 pieces
Ramps for extra low clearance vehicles
Vehicles lift platforms 902818
Ramps for extra low clearance vehicles, ramp height 60 mm | 1 set / 4 pieces
Wheel alignment stands 902085
Kit of stands for alignment | 1 set / 4 pieces
Width extendion 200 mm
Width extendion 200 mm
200 mm
Width extension 902283
For 2-post lift KPX35LLE | enables columns to be widened up to 3200 mm