Motor homes
Showing 1–99 of 184 results
Floor leveling for HDVL 25-90-I / HDVL 35-90-I
Floor leveling for HDVL 2x-80-I
Retrofit kit Fast clamps
CCD kit for 3D Quick-clamps (VSG.FC167.701916 to VSG.FC169.701923) | 1 set / 2 pieces
Warning light
Light signal “system in use”
2-post lift KPX35
3.5 t, electromechanical, asymmetrical, rotated columns at 45°, 2-stage long arms, 3-stage short arms, TEq-Link
2-post lift KPX42E
4.2 t, electromechanical, symmetrical posts, asymmetrical support arms, 2-stage long arms, 3-stage short arms, TEq-Link, energy kit
2-post lift KPX42LIK
4.2 t, electromechanical, symmetrical, 4 x 3-stage arms, TEq-Link
2-post lift KPX42ELIK
4.2 t, electromechanical, symmetrical, double control panel, 4 x 3-stage arms, TEq-Link, energy kit
2-post lift KPX55LIKTA
5.5 t, electromechanical, symmetric, 4 long arms, front arms 4-stage, TEq-Link
2-post lift KPX55ELIKTA
5.5 t, electromechanical, symmetric, 4 long arms, front arms 4-stage, double control panel, TEq-Link, energy kit
2-post lift KPH350.45
4.5 t, electrohydraulic, baseless, symmetrical posts, asymmetrical support arms | 3 x 400 V / 50 Hz
2-post lift KPH370.45K
4.5 t, electrohydraulic, asymmetrical, arms for lifting of vans and off-road vehicles
2-post lift KPH370.45LIK
4.5 t, electrohydraulic, symmetrical, arms for lifting of long wheel base vans and easy loading of cars
Diagnostic kit STDADIAG/SW
TEXA IDC5 SW KIT – Diagnostic setup for those who already have TEXA devices (e.g., ADAS RCSS)
Support trestle
7500 kg, 1330 – 2030 mm
Support trestle
10000 kg, 1235 – 2040 mm
Diagnostic kit STDADIAG
IDC5 KIT TEXA – for diagnostic wheel alignment | kit for those who have a wheel alignment but no TEXA accessories
2-post lift KPH370.50LIK
5.0 t, electrohydraulic, symmetrical, arms for lifting of long wheel base vans and easy loading of cars
Vehicle fuses
For turntable, Ø 120 mm | 1 set / 2 pieces
Wheel clamps Fast clamps
Quick-clamps | for CCD wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.8 kg (per set) | 1 set / 2 pieces
Wheel clamps Fast clamps
Quick-clamps | for 3D wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.5 kg (per set) | 1 set / 2 pieces
Pads
Support plate, rubber pad, adjustable – for quick-positioning on 4 heights | 4-stage | 1 set / 4 pieces
Support plates
3.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Warning light
Light signal “system in use”
Support plates
3.2 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Spacers for pads
4 x 90 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces
2-post lift KPH370.70LIKTA
7.0 t, electrohydraulic, asymmetrical, supporting arms 4 x 3-piece
Tyre changer G1065.N
Mounting head and mounting lever, center lock, max. speed 15 rpm, passenger car, clamping capacity 12 – 24″, max. rim width 15″ (max. wheel width 381 mm), RAL 5005
Tyre changer G7641D.24PLUS
Mounting head and mounting lever, automatic, max. speed 16 rpm, passenger car, chucking table with double adjustable clamp position, rim diameter 10 – 26.5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
Automatic tyre changer G7641ID.24
Mounting head and mounting lever, max. speed 16 rpm, passenger car, chucking table with double adjustable clamp position, clamping capacity 10 – 24″, new reinforced frame, max. rim width 15″ (max. wheel width 381 mm), RAL 5005
Tyre changer G7641D.24
Mounting head and mounting lever, automatic, max. speed 16 rpm, passenger car, chucking table with double adjustable clamp position, rim diameter 10 – 26.5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
Automatic tyre changer G7641IV.22
Mounting head and mounting lever, 2 speeds (max. 13 rpm), passenger car, chucking table with double adjustable clamp position, clamping capacity 11 – 22″, new reinforced frame, max. rim width 15″ (max. wheel width 381 mm), RAL 5005
Tyre changer G7641V.22
Mounting head and mounting lever, automatic, 2 speeds (max. 13 rpm), passenger car, chucking table with double adjustable clamp position, rim diameter 11 – 24.5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
Automatic tyre changer G7645D.26PLUS
Max. speed 16 rpm, passenger car, clamping capacity 8 – 32″, max. rim width 17″ (max. wheel width 431 mm), RAL 5005
Automatic tyre changer G7645ID.26
Max. speed 16 rpm, passenger car, clamping capacity 8 – 32″, max. rim width 17″ (max. wheel width 431 mm), RAL 5005
Automatic tyre changer G7645D.26
Max. speed 16 rpm, passenger car, clamping capacity 8 – 32″, max. rim width 17″ (max. wheel width 431 mm), RAL 5005
Automatic tyre changer G7441V.22PLUS
2 speeds (max. 13 rpm), passenger car, clamping capacity 10 – 24,5″, max. rim width 14,1″ (max. wheel width 381 mm), RAL 5005
Automatic tyre changer G7441IV.22
2 speeds (max. 13 rpm), passenger car, clamping capacity 10 – 24,5″, max. rim width 14,1″ (max. wheel width 381 mm), RAL 5005
Automatic tyre changer G7441V.22
2 speeds (max. 13 rpm), passenger car, clamping capacity 10 – 24,5″, max. rim width 14,1″ (max. wheel width 381 mm), RAL 5005
Automatic tyre changer G7441.22
2 speeds (max. 13 rpm), passenger car, clamping capacity 10 – 24,5″, max. rim width 14,1″ (max. wheel width 381 mm), RAL 5005
Automatic tyre changer G7441.20
Max. speed 17,3 rpm, passenger car, clamping capacity 10 – 24,5″, max. rim width 14,1″ (max. wheel width 381 mm), RAL 5005
Tyre changer G1500.3IT PLUS
Leverless, incl. 19″ TFT display and inflation device, max. speed 18 rpm, passenger car, clamping capacity 10 – 34″, max. rim width 15″ (max. wheel width 380 mm) | chuck with central clamping – suitable also for reverse wheels | for all tyre types with max. wheel diameter 54″ (1370 mm)
Semiautomatic tyre changer G7240.20
Swing series, max. speed 7,3 rpm, passenger car, clamping capacity 10 – 22,5″ (chucking table 20″), max. rim width 12″ (max. wheel width 305 mm), RAL 5005
Tyre changer G8645ID.26PLUS
Leverless, max. speed 16 rpm, passenger car, clamping capacity 8 – 32″, max. rim width 17″ (max. wheel width 431 mm), RAL 5005
Tyre changer G8945ITD.26S
Leverless, incl. inflation device, max. speed 15 rpm, passenger car, clamping capacity 10 – 26″, max. rim width 15″ (max. wheel width 381 mm) | chuck with central clamping – suitable also for reverse wheels | for all tyre types with max. wheel diameter 45″ (1143 mm)
Tyre changer G8945D.26S
Leverless, max. speed 15 rpm, passenger car, clamping capacity 10 – 26″, max. rim width 15″ (max. wheel width 381 mm) | chuck with central clamping – suitable also for reverse wheels | for all tyre types with max. wheel diameter 45″ (1143 mm)
Extension 100 mm (3000/4000/5500 kg) / 150 mm (7000/8500/10000 kg)
Eyebolt for handling columns 901927
3.2 t – 3.5 t – 4.2 t | facilitates installation of the lift, can be used again for other installations
Eyebolt for handling columns 902894
5.5 t | it facilitates the handling and installation of the lift, reusable for multiple installations
Increasing overhead cable passage 902344
Kit for increasing overhead cable passage height by up to +1.5 m
Inground cable connection kit 902498
Allows columns connection cables to be placed inground, eliminating the overhead connecting pipes and hight restrictions | Ideal for workshops with low ceilings
Outrigger plates 901453
4.2 / 4.5 t | allowing installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Outrigger plates 902412
5.5 t | allowing installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Spacers for pads 901071
4 x 89 mm, 4 x 127 mm | incl. 2 organizer racks for mounting on the columns | 1 set / 8 pieces
Spacers for pads 901248
4 x 200 mm | incl. 2 organizer racks for mounting on the columns | 1 set / 4 pieces
Support pads 901330
U-shaped frame engaging adapters | 1 set / 4 pieces
Support pads 901538
Kit with pads for TESLA | 1 set / 4 pieces
Support pads 901606
4 pads for Ducato / Boxer / Jumper – 2 front and 2 rear | 1 set / 4 pieces
Support pads 901712
For Mercedes Sprinter and Volkswagen Crafter, old and new series | 1 set / 6 pieces
Support pads 901859
4 pads for Mercedes G class – 2 front and 2 rear | 1 set / 4 pieces
Support pads 902023
Kit with pads for Fiat 500E, 500 ABARTH | 1 set / 4 pieces
Support pads 902146
Kit with pads for MEB platform | 1 set / 4 pieces
Tool support 902511
Ergonomic holder for impact wrench
Tool trays 902641
Magnetic | 1 set / 2 pieces
Universal support Ø 35 mm
Mounting hole Ø 35 mm, suitable for holding various tools, such as the transmission plate GA passenger car | fitted with a bushing
Vehicles lift platforms 902818
Ramps for extra low clearance vehicles, ramp height 60 mm | 1 set / 4 pieces
Wheel alignment stands 902085
Kit of stands for alignment | 1 set / 4 pieces
Wheel fork reduction for wheels Ø 700 – 800 | 1 piece
Wheel free cross-beam max. 15000 kg
Crossbar for standard lifts with adjustable fork
Width extension 902283
For 2-post lift KPX35LLE | enables columns to be widened up to 3200 mm
Wheel balancer GTL4.140RC
22″ full HD LCD monitor, industrial PC, automatic cycle, incl. cones for trucks (Ø 202 – 221 mm, 281 mm), adapter, handwheel nut and wheel lift (200 kg), truck, rim diameter 10 – 26/30″ (automatic/manual)
Wheel balancer GTL2.120NRC
Backlit LCD graphic display (132 x 40 mm), automatic cycle, incl. cones for trucks (Ø 202 – 221 mm, 281 mm), adapter, handwheel nut and wheel lift (200 kg), truck, rim diameter 10 – 26/30″ (automatic/manual)
3D wheel aligner RAVTD3200HP.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 27″ TFT display and closed cabinet, RAL 5005
3D wheel aligner RAVTD3200HP.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 27″ TFT display and closed cabinet, RAL 7040
3D wheel aligner RAVTD3200HPR.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 27″ TFT display and closed cabinet, RAL 5005
3D wheel aligner RAVTD3200HPR.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 27″ TFT display and closed cabinet, RAL 7040
3D wheel aligner RAVTD3200L.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 22″ TFT display and open cabinet, RAL 7040
3D wheel aligner RAVTD3200L.4
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 4-point clamps, 22″ TFT display and open cabinet, RAL 7040
3D wheel aligner RAVTD3200SP.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 22″ TFT display and closed cabinet | Blue (RAL 5005)
3D wheel aligner RAVTD3200SP.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 22″ TFT display and closed cabinet | Grey (RAL 7040)
3D wheel aligner RAVTD3200SP.4
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 4-point clamps, 22″ TFT display and closed cabinet, RAL 5005
3D wheel aligner RAVTD3200SP.4
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 4-point clamps, 22″ TFT display and closed cabinet, RAL 7040
4-post lift KP175E
10.0 t, electromechanical, symmetrical, lift for fork lifts
4-post lift KP440NE.9
24.0 t, electromechanical, symmetrical
4-post lift KP442E
12.0 t, electromechanical, symmetrical
4-post lift KP442NE
14.0 t, electromechanical, symmetrical
CCD wheel aligner RAVTD 8060P TWS
6 CCD truck wheel aligner, with standard sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWS
6 CCD truck wheel aligner, with standard sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWS
6 CCD truck wheel aligner, with standard sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWS
6 CCD truck wheel aligner, with standard sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWSR
6 CCD truck wheel aligner, with lowered sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWSR
6 CCD truck wheel aligner, with lowered sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWSR
6 CCD truck wheel aligner, with lowered sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWSR
6 CCD truck wheel aligner, with lowered sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8080P TWS
8 CCD truck wheel aligner, with standard sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8080P TWS
8 CCD truck wheel aligner, with standard sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8080P TWS
8 CCD truck wheel aligner, with standard sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8080P TWS
8 CCD truck wheel aligner, with standard sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8080P TWSR
8 CCD truck wheel aligner, with lowered sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz