Light commercial
Showing 1–99 of 293 results
Floor leveling for vertical scissor lifts with 6 m platform length – G
Galvanized
Floor leveling for vertical scissor lifts with 8 m platform length
Floor leveling for vertical scissor lifts with 9 m platform length
Retrofit kit Fast clamps
CCD kit for 3D Quick-clamps (VSG.FC167.701916 to VSG.FC169.701923) | 1 set / 2 pieces
Warning light
Light signal “system in use”
2-post lift KPX35
3.5 t, electromechanical, asymmetrical, rotated columns at 45°, 2-stage long arms, 3-stage short arms, TEq-Link
2-post lift KPX35E
3.5 t, electromechanical, asymmetrical, rotated columns at 45°, 2-stage long arms, 3-stage short arms, TEq-Link, energy kit
2-post lift KPX35EV
3.5 t, electromechanical, asymmetrical, rotated columns at 45°, EV arms, TEq-Link | 3 x 400 V / 50 Hz
2-post lift KPX35EV
3.5 t, electromechanical, asymmetrical, rotated columns at 45°, EV arms, TEq-Link | 3 x 230 V / 50 Hz
2-post lift KPX35EEV
3.5 t, electromechanical, asymmetrical, double control panel, rotated columns at 45°, EV arms, TEq-Link, energy kit
2-post lift KPX42E
4.2 t, electromechanical, symmetrical posts, asymmetrical support arms, 2-stage long arms, 3-stage short arms, TEq-Link, energy kit
2-post lift KPX42LIK
4.2 t, electromechanical, symmetrical, 4 x 3-stage arms, TEq-Link
2-post lift KPX42ELIK
4.2 t, electromechanical, symmetrical, double control panel, 4 x 3-stage arms, TEq-Link, energy kit
2-post lift KPX55LIKTA
5.5 t, electromechanical, symmetric, 4 long arms, front arms 4-stage, TEq-Link
2-post lift KPX55ELIKTA
5.5 t, electromechanical, symmetric, 4 long arms, front arms 4-stage, double control panel, TEq-Link, energy kit
2-post lift KPH350.40-1ph
4.0 t, electrohydraulic, baseless, symmetrical posts, asymmetrical support arms | 1 x 230 V / 50 Hz
2-post lift KPH350.40
4.0 t, electrohydraulic, baseless, symmetrical posts, asymmetrical support arms | 3 x 400 V / 50 Hz
2-post lift KPH350.45
4.5 t, electrohydraulic, baseless, symmetrical posts, asymmetrical support arms | 3 x 400 V / 50 Hz
2-post lift KPH370.45K
4.5 t, electrohydraulic, asymmetrical, arms for lifting of vans and off-road vehicles
2-post lift KPH370.45LIK
4.5 t, electrohydraulic, symmetrical, arms for lifting of long wheel base vans and easy loading of cars
Diagnostic kit STDADIAG/SW
TEXA IDC5 SW KIT – Diagnostic setup for those who already have TEXA devices (e.g., ADAS RCSS)
Diagnostic kit STDADIAG
IDC5 KIT TEXA – for diagnostic wheel alignment | kit for those who have a wheel alignment but no TEXA accessories
2-post lift KPH370.50LIK
5.0 t, electrohydraulic, symmetrical, arms for lifting of long wheel base vans and easy loading of cars
Support trestle
7500 kg, 1330 – 2030 mm | Grey (RAL 7040)
Support trestle
10000 kg, 1235 – 2040 mm | Grey (RAL 7040)
Support trestle
10000 kg, 1235 – 2040 mm | with on springs retracting rollers
Vehicle fuses
For turntable, Ø 120 mm | 1 set / 2 pieces
Wheel clamps Fast clamps
Quick-clamps | for CCD wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.8 kg (per set) | 1 set / 2 pieces
Wheel fork reduction for tires Ø 700 – 500 mm
Wheel clamps Fast clamps
Quick-clamps | for 3D wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.5 kg (per set) | 1 set / 2 pieces
Pads
Support plate, rubber pad, adjustable – for quick-positioning on 4 heights | 4-stage | 1 set / 4 pieces
Support plates
3.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Warning light
Light signal “system in use”
Extension for MRG55
100 mm (3000/4000/5500 kg) / 150 mm (7000/8500/10000 kg)
2-post lift KPH370.55LIKTA
5.5 t, electrohydraulic, asymmetrical, supporting arms 4 x 3-piece
Wheel free cross-beam for MRG55
15 t
Support plates
3.2 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Spacers for pads
4 x 90 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces
Eyebolt
5.5 t | facilitates the handling and installation of the lift, reusable for multiple installations | 1 set
2-post lift KPH370.70LIKTA
7.0 t, electrohydraulic, asymmetrical, supporting arms 4 x 3-piece
Tyre changer G1065.N
Mounting head and mounting lever, center lock, max. speed 15 rpm, passenger car, clamping capacity 12 – 24″, max. rim width 15″ (max. wheel width 381 mm), RAL 5005
Tyre changer G7641D.24PLUS
Mounting head and mounting lever, automatic, max. speed 16 rpm, passenger car, chucking table with double adjustable clamp position, rim diameter 10 – 26.5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
Automatic tyre changer G7641ID.24
Mounting head and mounting lever, max. speed 16 rpm, passenger car, chucking table with double adjustable clamp position, clamping capacity 10 – 24″, new reinforced frame, max. rim width 15″ (max. wheel width 381 mm), RAL 5005
Tyre changer G7641D.24
Mounting head and mounting lever, automatic, max. speed 16 rpm, passenger car, chucking table with double adjustable clamp position, rim diameter 10 – 26.5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
Automatic tyre changer G7641IV.22
Mounting head and mounting lever, 2 speeds (max. 13 rpm), passenger car, chucking table with double adjustable clamp position, clamping capacity 11 – 22″, new reinforced frame, max. rim width 15″ (max. wheel width 381 mm), RAL 5005
Tyre changer G7641V.22
Mounting head and mounting lever, automatic, 2 speeds (max. 13 rpm), passenger car, chucking table with double adjustable clamp position, rim diameter 11 – 24.5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
Automatic tyre changer G1001.24ELX
Mounting head and mounting lever, self-centering tulip chuck, max. speed 15 rpm, passenger car, clamping capacity 12 – 24″, max. rim width 15″ (max. wheel width 381 mm), RAL 5005
Automatic tyre changer G7645D.26PLUS
Max. speed 16 rpm, passenger car, clamping capacity 8 – 32″, max. rim width 17″ (max. wheel width 431 mm), RAL 5005
Automatic tyre changer G7645ID.26
Max. speed 16 rpm, passenger car, clamping capacity 8 – 32″, max. rim width 17″ (max. wheel width 431 mm), RAL 5005
Automatic tyre changer G7645D.26
Max. speed 16 rpm, passenger car, clamping capacity 8 – 32″, max. rim width 17″ (max. wheel width 431 mm), RAL 5005
Automatic tyre changer G7441V.22PLUS
2 speeds (max. 13 rpm), passenger car, clamping capacity 10 – 24,5″, max. rim width 14,1″ (max. wheel width 381 mm), RAL 5005
Automatic tyre changer G7441IV.22
2 speeds (max. 13 rpm), passenger car, clamping capacity 10 – 24,5″, max. rim width 14,1″ (max. wheel width 381 mm), RAL 5005
Automatic tyre changer G7441V.22
2 speeds (max. 13 rpm), passenger car, clamping capacity 10 – 24,5″, max. rim width 14,1″ (max. wheel width 381 mm), RAL 5005
Automatic tyre changer G7441.22
2 speeds (max. 13 rpm), passenger car, clamping capacity 10 – 24,5″, max. rim width 14,1″ (max. wheel width 381 mm), RAL 5005
Automatic tyre changer G7441.20
Max. speed 17,3 rpm, passenger car, clamping capacity 10 – 24,5″, max. rim width 14,1″ (max. wheel width 381 mm), RAL 5005
Tyre changer G1500.3IT PLUS
Leverless, max. speed 18 rpm, incl. 19″ TFT display and tubeless tyre inflation device, passenger car, rim diameter 10 – 34″, max. rim width 380 mm | chuck with central clamping – suitable also for reverse wheels | for all tyre types with max. wheel diameter 54″ (1370 mm)
Semiautomatic tyre changer G7240.20
Swing series, max. speed 7,3 rpm, passenger car, clamping capacity 10 – 22,5″ (chucking table 20″), max. rim width 12″ (max. wheel width 305 mm), RAL 5005
Tyre changer G8645ID.26PLUS
Leverless, max. speed 16 rpm, passenger car, clamping capacity 8 – 32″, max. rim width 17″ (max. wheel width 431 mm), RAL 5005
Tyre changer G8945ITD.26S
Leverless, incl. inflation device, max. speed 15 rpm, passenger car, clamping capacity 10 – 26″, max. rim width 15″ (max. wheel width 381 mm) | chuck with central clamping – suitable also for reverse wheels | for all tyre types with max. wheel diameter 45″ (1143 mm)
Tyre changer G8945D.26S
Leverless, max. speed 15 rpm, passenger car, rim diameter 10 – 26″, max. rim width width 381 mm | chuck with central clamping – suitable also for reverse wheels | for all tyre types with max. wheel diameter 45″ (1143 mm)
Tyre changer G5440V.22G
Mounting head and mounting lever, semiautomatic, incl. tire inflator, 2 speeds (max. 14 rpm), passenger car, rim diameter 10 – 24″, max. rim width 330 mm | Grey (RAL 7016)
Tyre changer G5440.22
Mounting head and mounting lever, semiautomatic, incl. tire inflator, max. speed 7/14 rpm, passenger car, rim diameter 10 – 24″, max. rim width 330 mm | Blue (RAL 5005)
Tyre changer G5440.22M
Mounting head and mounting lever, semiautomatic, incl. tire inflator, max. speed 7/14 rpm, passenger car, rim diameter 10 – 24″, max. rim width 330 mm | Blue (RAL 5005)
Tyre changer G5440I.22M
Mounting head and mounting lever, semiautomatic, incl. tubeless tyre inflation device, max. speed 7/14 rpm, passenger car, rim diameter 10 – 24″, max. rim width 330 mm | Blue (RAL 5005)
Tyre changer G5440I.22U
Mounting head and mounting lever, semiautomatic, incl. tubeless tyre inflation device, max. speed 7/14 rpm, passenger car, rim diameter 10 – 24″, max. rim width 330 mm | Blue (RAL 5005)
Automatic tyre changer G5140.22M
Mounting head and mounting lever, incl. tire inflator, max. speed 7/14 rpm, passenger car, clamping capacity 10 – 24″, max. rim width 17″ (max. wheel width 420 mm), RAL 5005
Tyre changer G5140IH.22U
Mounting head and mounting lever, semiautomatic, incl. tubeless tyre inflation device, max. speed 7/14 rpm, passenger car, rim diameter 10 – 24″, max. rim width 420 mm | Blue (RAL 5005)
Electronic wheel balancer with microprocessor GP4.140SCAN
22” full HD LCD monitor, industrial PC with static hard disk, 3D graphic, “SCAN” system to automatically input the rim profile, automatic cycle, pneumatic wheel locking, passenger car, rim diameter 10 – 30″, max. wheel capacity 44″
Eyebolt for handling columns 901927
3.2 t – 3.5 t – 4.2 t | facilitates installation of the lift, can be used again for other installations
Increasing overhead cable passage 902344
Kit for increasing overhead cable passage height by up to +1.5 m
Inground cable connection kit 902498
Allows columns connection cables to be placed inground, eliminating the overhead connecting pipes and hight restrictions | Ideal for workshops with low ceilings
Outrigger plates 901453
4.2 / 4.5 t | allowing installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Outrigger plates 902412
5.5 t | allowing installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Spacers for pads 901071
4 x 89 mm, 4 x 127 mm | incl. 2 organizer racks for mounting on the columns | 1 set / 8 pieces
Spacers for pads 901248
4 x 200 mm | incl. 2 organizer racks for mounting on the columns | 1 set / 4 pieces
Support pads 901330
U-shaped frame engaging adapters | 1 set / 4 pieces
Support pads 901538
Kit with pads for TESLA | 1 set / 4 pieces
Support pads 901606
4 pads for Ducato / Boxer / Jumper – 2 front and 2 rear | 1 set / 4 pieces
Support pads 901712
For Mercedes Sprinter and Volkswagen Crafter, old and new series | 1 set / 6 pieces
Support pads 901859
4 pads for Mercedes G class – 2 front and 2 rear | 1 set / 4 pieces
Support pads 902023
Kit with pads for Fiat 500E, 500 ABARTH | 1 set / 4 pieces
Support pads 902146
Kit with pads for MEB platform | 1 set / 4 pieces
Tool support 902511
Ergonomic holder for impact wrench
Tool trays 902641
Magnetic | 1 set / 2 pieces
Universal support Ø 35 mm
Mounting hole Ø 35 mm, suitable for holding various tools, such as the transmission plate GA passenger car | fitted with a bushing
Vehicles lift platforms 902818
Ramps for extra low clearance vehicles, ramp height 60 mm | 1 set / 4 pieces
Wheel alignment stands 902085
Kit of stands for alignment | 1 set / 4 pieces
Width extension 902283
For 2-post lift KPX35LLE | enables columns to be widened up to 3200 mm
Electronic wheel balancer with microprocessor GP3.150WSPLUS
3D, 22″ LCD monitor, pneumatic locking, passenger car, rim diameter 10 – 26″, max. wheel capacity 43″ | Blue (RAL 5005)
Electronic wheel balancer with microprocessor G3.150WSPLUS
3D, 22″ LCD monitor, passenger car, rim diameter 10 – 26″, max. wheel capacity 43″ | Blue (RAL 5005)
Electronic wheel balancer with microprocessor GP3.150WS
3D, 22″ LCD monitor, pneumatic locking, passenger car, rim diameter 10 – 26″, max. wheel capacity 43″ | Blue (RAL 5005)
Electronic wheel balancer with microprocessor G3.150WS
3D, 22″ LCD monitor, passenger car, rim diameter 10 – 26″, max. wheel capacity 43″ | Blue (RAL 5005)
Electronic wheel balancer with microprocessor GP3.150S
3D, 22″ LCD monitor, pneumatic locking, passenger car, rim diameter 10 – 26″, max. wheel capacity 43″ | Blue (RAL 5005)
Electronic wheel balancer with microprocessor G3.150S
3D, 22″ LCD monitor, passenger car, rim diameter 10 – 26″, max. wheel capacity 43″ | Blue (RAL 5005)
Electronic wheel balancer with microprocessor G3.150
3D, 22″ LCD monitor, passenger car, rim diameter 10 – 26″, max. wheel capacity 43″ | Blue (RAL 5005)
Electronic wheel balancer with microprocessor GP3.128NR
2D, 7″ touchscreen, pneumatic locking, passenger car, rim diameter 10 – 26″ | Blue (RAL 5005)
Electronic wheel balancer with microprocessor G3.128NR
2D, 7″ touchscreen, passenger car, rim diameter 10 – 26″ | Blue (RAL 5005)
Electronic wheel balancer with microprocessor G2.121RFM
Interactive LCD display, measuring arm for automatic wheel width and rim diameter measuring, passenger car, rim diameter 10 – 26″ | Blue (RAL 5005)
Electronic wheel balancer with microprocessor G2.120R
Interactive LCD display, measuring arm for automatic wheel width and rim diameter measuring, passenger car, rim diameter 10 – 26″ | Blue (RAL 5005)