Accessories lifts
Elevate your workshop lifts to the next level with Ravaglioli’s premium accessories. From control boxes to adaptors and kits, our selection of accessories lifts will enhance your lifting operations.
Showing 100–198 of 302 results
Warning light
Light signal “system in use”
Traverses for XS30-CAT
For vans and off-road vehicles | 1 set / 2 pieces
Pipe cover 1 m
For surface installation of lifts
Support trestle
10000 kg, 1235 – 2040 mm | Grey (RAL 7040)
Support trestle
10000 kg, 1235 – 2040 mm | with on springs retracting rollers
Support trestle
7500 kg, 1330 – 2030 mm | Grey (RAL 7040)
LED lighting kit
Wheel fork reduction for tires Ø 700 – 500 mm
Extension for MRG55
100 mm (3000/4000/5500 kg) / 150 mm (7000/8500/10000 kg)
Hose cover 1 m | for surface installation
1 m | for surface installation
Run-up ramps
Long additional ramps for low ground clearance vehicles
Wheel free cross-beam for MRG55
15 t
Spacers 140 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | for quick drop-in of the K arms, Ø 45 mm | 1 set / 4 pieces
Control unit installation kit
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
Engine support for KT100 (Mercedes)
for KT100 (Mercedes)
Limit switch | operated by elastic spring | supplied not installed
For all the lifts with control unit in the upper part of the column (VARPH370.xx/T)
Run-up ramps
Long, 1100 mm | for 4-post lifts RAV4401, RAV4402, RAV4401SI | 1 pair
Run-up ramps
Long, 1500 mm | for 4-post lifts RAV4406LSI, RAV4502LSI | 1 pair
Brakets for 3D alignment
1 set / 2 pieces
Energy kit for KPH370.xx
Compressed air connection and 230 V socket | 1 piece
Jacking beam slides for J50HA-PHA – J30K-KL-PK-PKL
for J50HA-PHA – J30K-KL-PK-PKL
Jacking beam slides for J50HA-PHA-J30K-KL-PK-PKL
for J50HA-PHA-J30K-KL-PK-PKL
Factory assembly of the adjustable front pad kit S290A1 on the lift
of the adjustable front pad kit S290A1 on the lift
Jacking beam slides for J50HA-PHA
for J50HA-PHA
Jacking beam slides for J50HA-PHA
for J50HA-PHA
LED lighting kit 6-fold
Run-up ramps
Long, 1000 mm | for 4-post lifts RAV4405L, RAV4405LSI, RAV4501L | 1 pair
Run-up ramps
Long, 1470 mm | for 4-post lifts RAV4651L, RAV4652L | 1 pair
Run-up ramps
Long, 1500 mm | for 4-post lift RAV4402SI | 1 pair
Run-up ramps
Long, 1500 mm | for 4-post lifts RAV4406L, RAV4502L | 1 pair
Spacers 10 mm | for K arms | 1 set / 4 pieces
Spacers 140 mm | or quick drop-in of the R arms
Set of pad extensions for 2-post lifts | 1 set / 4 pieces
Gearbox plate
Optional for pit lifts, suspended
Gearbox plate
Optional for pit lifts, suspended
Pads 3.7 t | 1 set / 4 pieces
For lifts with capacity 3.7 t
Run-up ramps
Long, 1000 mm | for 4-post lift RAV4350 | 1 pair
Run-up ramps
Long, 1200 mm | for 4-post lifts RAV4800, RAV4802 | 1 pair
Seat for turntables | plates and slip plates excluded | 1 set
For RAV4350, RAV4401, RAV4405L, RAV4501L, RAV4651L, RAV4800
Vehicle fuses
For turntable, Ø 120 mm | 1 set / 2 pieces
Drive-through ramps 1350 mm, ground ramps
Additional ramps to drive-through the lift, for 600N series lifts with wheel-free jack | 1 set / 2 pieces
Drive-through ramps 1560 mm, suspended ramps
Additional ramps to drive-through the lift, for 600N series lifts with wheel-free jack | 1 set / 2 pieces
Drive-through ramps 1800 mm, suspended ramps
Additional ramps to drive-through the lift, for 600N series lifts with wheel-free jack | 1 set / 2 pieces
Drive-through ramps 2000 mm, suspended ramps
Additional ramps to drive-through the lift, for 600N series lifts with wheel-free jack | 1 set / 2 pieces
Wheel fork reduction for tires Ø 800 – 700 mm
1 piece
Wheel fork reduction for tires Ø 900 – 800 mm
1 piece
Forklift brackets
For moving lifting units of electrohydraulic mobile column lifts
Pads
Support plate, rubber pad, adjustable – for quick-positioning on 4 heights | 4-stage | 1 set / 4 pieces
Support plates
3.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Warning light
Light signal “system in use”
Wheel clamp mount
Adjustable special version, wheel Ø 500 – 1200 mm
Drive-through ramps 1350 mm, ground ramps
Additional ramps to drive-through the lift, for 600N series lifts without wheel-free jack | 1 set / 2 pieces
Drive-through ramps 1560 mm, suspended ramps
Additional ramps to drive-through the lift, for 600N series lifts without wheel-free jack | 1 set / 2 pieces
Drive-through ramps 1800 mm, suspended ramps
Additional ramps to drive-through the lift, for 600N series lifts without wheel-free jack | 1 set / 2 pieces
Drive-through ramps 2000 mm, suspended ramps
Additional ramps to drive-through the lift, for 600N series lifts without wheel-free jack | 1 set / 2 pieces
Control unit installation kit
2 m, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of 2 m | suitable for RAV.640N1.193278, RAV.640N2.193117, RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.660N2.193360 and RAV.650N2.193384
Control unit installation kit
2 m, control unit left | mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of 2 m
Limit switch | operated by bar | for 3-phase power supply | supplied not installed
For all lifts with 3-phase power supply
Wheel-lifting platform kit
Support plates
4 / 4.2 / 4.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Supports for spacers, bushing Ø 45 mm
For 2-post lifts | 1 set / 2 pieces
Width extendion 200 mm
200 mm
Support plates
3.2 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Supports for chassis lifting | adjustable | bushing Ø 45 mm | 1 set / 4 pieces
Needed spacers S224A3-A4, S370A18
Recessed installation kit
Double lowering speed
Fitted in factory
Spacers for pads
4 x 90 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces
Adjustable front pad kit
Eyebolt
5.5 t | facilitates the handling and installation of the lift, reusable for multiple installations | 1 set
LED lighting kit 4-fold, 24 V
Supporting arm extensions
Capacity reduced to 3.7 t | for LIK arms | 1 set / 2 pieces
Pads 3.7 t | 1 set / 4 pieces | fitted in factory
Pads for lifts with capacity 3.7 t | Set of pads S345A1, mounted instead of standard pads
Recessed installation kit
Spacers 140 mm, bushing Ø 60 mm | 1 set / 4 pieces
Spacers 80 mm, bushing Ø 60 mm | 1 set / 4 pieces
Support plates for floors with a concrete thickness of 100 – 150 mm (+ 15 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 100 – 150 mm | 1 set / 2 pieces
Support plates for floors with a concrete thickness of 100 – 150 mm (+ 15 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 100 – 150 mm | 1 set / 2 pieces
Support plates for floors with a concrete thickness of 150 mm (+20 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 150 mm | 1 set / 2 pieces
Additional platform for three wheelers
For all electro-hydraulic scissor lifts
Additional run up ramps on the short ramp side | 1 set
Adjustable front pad kit Capacity maxi 7000 kg
Capacity maxi 7000 kg
Adpators with pads for chassis lifting 1 set / 2 pieces
1 set / 2 pieces
Aggregate plate with supporting arms GA P (Porsche)
A particularly versatile aggregate plate for the removal and installation of engines, transmissions, axles, exhaust systems, etc.
Aggregate support Universal | for W221, W164, W209, R171
Weight 20 kg, max. load capacity 800 kg
Agricultural adapters 1 set / 2 pieces
To lift agricultural tractor | front and rear adapter
Column connection cable extension by “m” meter
Cables between columns “m” meters longer than standard
Connection template 900005
For front/back base connection | necessary for lift installation
Control unit cover for all electro-hydraulic scissor lifts
To protect the control panel | for all models
Control unit cover for lifts
To protect the control panel
Control unit installation kit “m” meter, control unit left
Mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of “m” meter | sold by the metre -2 m included in delivery as standard
Control unit installation kit “m” meter, control unit left
Mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of “m” meter | sold by the metre
Control unit installation kit “m” meter, control unit left
Mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of “m” meter | sold by the metre
Control unit installation kit “m” meter, control unit left
Mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of “m” meter | sold by the metre
Control unit installation kit “m” meter, control unit left
Mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of “m” meter | for lifts of the 800 series with floor compensation | sold by the metre
Control unit installation kit “m” meter, control unit left
Mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of “m” meter | for lifts of the 800 series with floor compensation | sold by the metre
Control unit installation kit “m” meter, control unit right
Mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre – 2 m included in delivery as standard
Control unit installation kit “m” meter, control unit right
Mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
Control unit installation kit “m” meter, control unit right
Mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
Control unit installation kit 2 m, control unit left
Mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of 2 m | suitable for RAV.650N5.193902, RAV.650N5.193018 and RAV.650N5.193919
Control unit installation kit 2 m, control unit left
Mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of 2 m | suitable for RAV.640N4.193063