Accessories lifts
Elevate your workshop lifts to the next level with Ravaglioli’s premium accessories. From control boxes to adaptors and kits, our selection of accessories lifts will enhance your lifting operations.
Showing 199–297 of 302 results
LED lighting kit 6-fold
Lifting bracket
Limit switch | operated by bar | for 3-phase power supply | supplied not installed
For all lifts with 3-phase power supply
Manual wheel clamp
Outrigger plates 901453
4.2 / 4.5 t | allowing installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Outrigger plates 902412
5.5 t | allowing installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Outrigger plates for floors with a concrete thickness of 100 – 150 mm (+ 15 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 100 – 150 mm | 1 set / 2 pieces
Outrigger plates for floors with a concrete thickness of 150 mm (+20 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 150 mm | 1 set / 2 pieces
Outrigger plates for floors with a concrete thickness of 150 mm (+20 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 150 mm | 1 set / 2 pieces
Outriggers 1 set / 2 pieces
1 set / 2 pieces
Outriggers 1 set / 2 pieces
1 set / 2 pieces
Pads 3.7 t | 1 set / 4 pieces
For lifts with capacity 3.7 t
Pick-up pad extensions for EV arms | 4 x 200 mm | 1 set / 4 pieces
Incl. 2 organizer racks for mounting on the columns
Pick-up pad extensions for EV arms | 4 x 89 mm, 4 x 127 mm | 1 set / 8 pieces
Incl. 2 organizer racks for mounting on the columns
Pipe cover 1 m
For surface installation of lifts
Pneumatic wheel clamp
Portable lift kit with 1 wheeled handle and 2 wheels
For low-rise lifts
Post covers for 4-post lift
Post covers for RAV4651L, RAV4652L, RAV4800, RAV4802
Power unit cover for RAV4350, RAV4401, RAV4800, RAV4402, RAV4401SI, RAV4402SI, RAV4651L, RAV4652L
Power unit driver side | 13,12 ft
driver side | 13,12 ft
Power unit driver side | 16,40 ft
driver side | 16,40 ft
Power unit driver side | 6,56 ft
driver side | 6,56 ft
Power unit driver side | 9,84 ft
driver side | 9,84 ft
Power unit passenger side | 13,12 ft
passenger side | 13,12 ft
Power unit passenger side | 16,40 ft
passenger side | 16,40 ft
Power unit passenger side | 6,56 ft
passenger side | 6,56 ft
Power unit passenger side | 9,84 ft
passenger side | 9,84 ft
Recess Kit former 057998070 recess kit
former 057998070 recess kit
Recessed installation kit
Recessed installation kit
Rubber pads 120 mm
Suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
Rubber pads 20 mm
Suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
Rubber pads 200 mm
Suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
Rubber pads 40 mm
Suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
Rubber pads 60 mm
Suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N6.193964, RAV.660N2.193360, RAV.650N6.193025, RAV.640N5.193049 and RAV.640N4.192998 | 1 set / 4 pieces
Run off ramps for RAV4350 | 1 pair
Run off ramps for RAV4401, RAV4402, RAV4401SI | 1 pair
Run off ramps for RAV4402SI | 1 pair
Run off ramps for RAV4405L, RAV4405LSI, RAV4501L | 1 pair
Run off ramps for RAV4406L, RAV4502L | 1 pair
Run off ramps for RAV4502LSI, RAV4406LSI | 1 pair
For RAV4502LSI, RAV4406LSI | 1 pair
Run off ramps for RAV4651L | 1 pair
Run off ramps for RAV4800 | 1 pair
Run up ramps 2300 mm
1 pair
Run up ramps 2500 mm
For all surface installation versions | 1 pair
Run up ramps 3300 mm
For all surface installation versions | 1 pair
Run up ramps long, 1000 mm
For 4-post lift RAV4350 | 1 pair
Run up ramps long, 1000 mm
For 4-post lifts RAV4405L, RAV4405LSI, RAV4501L | 1 pair
Run up ramps long, 1100 mm
For 4-post lifts RAV4401, RAV4402, RAV4401SI | 1 pair
Run up ramps long, 1200 mm
For 4-post lifts RAV4800, RAV4802 | 1 pair
Run up ramps long, 1470 mm
For 4-post lifts RAV4651L, RAV4652L | 1 pair
Run up ramps long, 1500 mm
For 4-post lift RAV4402SI | 1 pair
Run up ramps long, 1500 mm
For 4-post lifts RAV4406L, RAV4502L | 1 pair
Run up ramps long, 1500 mm
For 4-post lifts RAV4406LSI, RAV4502LSI | 1 pair
Run up ramps long, 2300 mm
Ramps S8000A10 replacing the standard ramps | 1 pair
Seat for turntables | plates and slip plates excluded | 1 set
For RAV4350, RAV4401, RAV4405L, RAV4501L, RAV4651L, RAV4800
Spacer supports bushing Ø 60 mm
1 set / 2 pieces
Spacers 10 mm | for K arms | 1 set / 4 pieces
Spacers 140 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | for quick drop-in of the K arms, Ø 45 mm | 1 set / 4 pieces
Spacers 140 mm | or quick drop-in of the R arms
Set of pad extensions for 2-post lifts | 1 set / 4 pieces
Spacers 200 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | bushing Ø 45 mm | 1 set / 4 pieces
Spacers 80 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | for quick drop-in of the K arms, Ø 45 mm | 1 set / 4 pieces
Spacers for 4-post lifts
To close turntable housing (As a replacement for turntables) | 1 set / 2 pieces
Spacers for 4-post lifts
To close turntable housing (As a replacement for turntables) | 1 set / 2 pieces
Spacers for 4-post lifts
To close turntable housing (As a replacement for turntables) | 1 set / 2 pieces
Spacers for 4-post lifts
To close turntable housing (As a replacement for turntables) | 1 set / 2 pieces
Spacers for pads 901071
4 x 89 mm, 4 x 127 mm | incl. 2 organizer racks for mounting on the columns | 1 set / 8 pieces
Spacers for pads 901248
4 x 200 mm | incl. 2 organizer racks for mounting on the columns | 1 set / 4 pieces
Support pads 901330
U-shaped frame engaging adapters | 1 set / 4 pieces
Support pads 901538
Kit with pads for TESLA | 1 set / 4 pieces
Support pads 901606
4 pads for Ducato / Boxer / Jumper – 2 front and 2 rear | 1 set / 4 pieces
Support pads 901712
For Mercedes Sprinter and Volkswagen Crafter, old and new series | 1 set / 6 pieces
Support pads 901859
4 pads for Mercedes G class – 2 front and 2 rear | 1 set / 4 pieces
Support pads 902023
Kit with pads for Fiat 500E, 500 ABARTH | 1 set / 4 pieces
Support pads 902146
Kit with pads for MEB platform | 1 set / 4 pieces
Support pads for Fiat 500E, 500 ABARTH
Supports for 2-post lifts | 1 set / 4 pieces
Support pads for Mercedes Sprinter/VW LT + Crafter | Ø 45 mm
Holding set, adjustable – 2 x rod-shaped supports, 2 x V-shaped supports | bushing Ø 45 mm | needed spacers S224A3-A4 S370A18 | 1 set / 4 pieces
Support pads for Mercedes Sprinter/VW LT + Crafter | Ø 60 mm
V-shaped supports | bushing Ø 60 mm | 1 set / 2 pieces
Support pads TESLA | for EV arms
Supports for 2-post lifts | 1 set / 4 pieces
Support pads TESLA | for K arms Ø 45
Supports for 2-post lifts | 1 set / 4 pieces
Support pads TESLA | for K arms Ø 55
Supports for 2-post lifts | 1 set / 4 pieces
Supports for spacers, bushing Ø 45 mm
For 2-post lifts | 1 set / 2 pieces
Tool support 902511
Ergonomic holder for impact wrench
Tool trays | magnetic | 1 set / 4 pieces
Tool trays 902641
Magnetic | 1 set / 2 pieces
Towing lever Capacity 3000 / 4000 / 5500 kg
Turntable covers for 615 mm platforms
Spacers to completely close turntable recess | suitable for RAV.640N2.193117, RAV.640N2.193469, RAV.640N2.193001, RAV.640N2.193582, RAV.640N2.193216, RAV.640N3.192981 and RAV.640N2.193476 | 1 set / 2 pieces
Turntable covers for 650 mm platforms
Spacers to completely close turntable recess | suitable for RAV.650N2.193797, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N5.193902, RAV.650N5.193018, RAV.640N5.193049, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 2 pieces
U-support
Universal support Ø 35 mm
Mounting hole Ø 35 mm, suitable for holding various tools, such as the transmission plate GA passenger car | fitted with a bushing
Vehicles lift platforms 1 set / 4 pieces
Ramps for extra low clearance vehicles
Vehicles lift platforms 902818
Ramps for extra low clearance vehicles, ramp height 60 mm | 1 set / 4 pieces
Wheel alignment stands 902085
Kit of stands for alignment | 1 set / 4 pieces
Wheel fork extension 150 mm
Extensions for adjustable fork (1 per column) | 1 set
Wheel fork reduction for wheels Ø 500 – 700 mm | 1 piece
Wheel fork reduction for wheels Ø 700 – 800 | 1 piece
Wheel fork reduction for wheels Ø 800 – 900 | 1 piece
Wheel free cross beam for U-versions | capacity 15000 kg